Changing Font Size

Hemi Performance's own gasket kit, a combination of some of the best gaskets available for the Hemi 6!
(Gaskets included in this kit are composite and cork/rubber mix - they are not our HP Nitrile gaskets.)
The HP gasket kit includes every engine gasket, including a high performance graphite head gasket, & HP's exclusive "Felpro" Neoprene Rear Main Seal.

Say goodbye to blown head gaskets & leaking rear main seals today!

Kit Contents
Qty	Part
1x	OBSOLETE - HP Premium Graphite Cylinder Head Gasket : suit Hemi 6
1x	HP Premium Graphite Inlet/Exhaust Manifold Gasket : suit Hemi 6
1x	Sump Rail Gasket & Seal Set : suit Hemi 6
1x	Side Plate Gasket, in cork : Suit Hemi 6
1x	Timing Cover Gasket & Balancer Seal Set (inc Water Pump Gasket) : Suit Hemi 6
1x	Water Inlet/Thermostat Housing Gasket : suit Hemi 6, Slant 6 & Small Block Magnum
1x	Fuel Pump Gasket : suit Hemi 6, Slant 6, Small Block & Big Block
6x	Fibre Washer/Gasket: Suit Hemi 6 Side Plate Bolts
1x	Oil Pump Lid "O" Ring : Suit Hemi 6, Slant 6, Small Block & Big Block
1x	Oil Pump Pick-up Pipe Gasket : suit Hemi 6
12x	Polyacrylate Valve Stem Seal Intake: suit Slant 6, Hemi 6, Small Block, and Big Block
1x	Carburetor To Manifold Base-Plate Gasket : 2-Bbl
1x	Tappet/Rocker Cover Gasket, in cork : 4mm thickness: Suit Hemi 6
1x	Crankshaft Rear Main Seal : Neoprene : Suit Hemi 6

Hemi Performance Premium Graphite Head Gaskets
Are you looking for the best cylinder head gasket for your engine build? Look no further. This Hemi Performance premium graphite gasket is guaranteed to out perform any other gasket on the market for standard through to high performance applications.
Made from a perforated stainless steel insert sandwiched between two layers of flexible graphite to ensure that they have a super high heat tolerance like no other aftermarket gasket.
From our experience, we've seen numerous other brand head gaskets fail prematurely. Put your mind at ease by using our tried and tested gasket for your engine.

Technical Specification (value relate to 1.5mm thickness)
Non-asbestos laminated jointing roll, composed of beater addition paper inserted with perforated 0.20 - 0.22 mm thick carbon steel sheet. The beater add layers are composed of mineral fibres and fillers, bonded with elastomer.
Max operating temperature 450°C	Compressibility: 17.8%	Recovery: min 59.6%.
Immersion Tests
Type	Compressibility	Recovery	Weight increment	Thickness Increment
in VS 30	17.9%	min 48.1%	max 17.8%	max 6.1%
in ASTM 3 OIL	19.1%	min 48.3%	max 19.5%	max 5.2%
in M 15	20.7%	min 36.5%	max 21.6%	max 11.9%
in FUEL	17.1%	min 46.0%	max 15.9%	max 3.6%
in COOLANT	22.9%	min 44.9%	max 24.9%	max 8.5%