Changing Font Size

This clutch kit is a combination of modified pressure plate to increase clamping pressure and a organic plate to offer better friction point for mixed/street use - this clutch has been dyno tested and rated to hold up to 300 RWHP without slipping.

• Self cooling flywheel is made of one piece of steel, its is then machined and the ring gear is spline cut into the billet and heat treated as one assembly - this mean maximum strength across the entire mating surface and mount points (see important notes below)
  
  
• Custom modified 10" pressure/cover plate custom made to fit the billet flywheel offers increased surface friction area for better hold with high horsepower engines.
  
  
• Organic 10" clutch allows smooth gear transitions and sufficient friction point for street/mixed use
  
  
• Performance Thrust Bearing that will fit directly onto factory carrier.
  
  
• Specific Grade 8 socket head cover plate bolts to bolt clutch to the flywheel.
  

IMPORTANT NOTE: There are cheaper ways of making a 10" clutch fit behind our vehicles, this involves modifying a non specific flywheel drilling partially into the ring gear - this is a dangerous method that could allow the clutch to come loose from the flywheel and cause serious damage to your flywheel, clutch and even the gearbox itself.
Our kit does not drill partly into flywheel and partly into ring gear!